Clear twin-wall polycarbonate thickness 8 or 10 mm is clear and non-transparent. This polycarbonate has cells therefore its better insulation (11=3,1 W/m2 K). 4mm thick polycarbonate is clear, colourless and transparent. Compared to twin-walled polycarbonate insulate less. (U=5,4 W/m2 K).
Yes, it is. Segments can be moved both directions.
Width of segments depends on length of the colour and number of segments (1,5 – 2,5m in compliance with construction and type of the enclosure).
Yes, all enclosures (except standardized models) are made (without any extra charge) exactly in accordance with customer’s request.
Construction STANDARD is made out of 50×38 carrying profiles. Construction PROGRES is made out of carrying profiles 60×63. Their use depend upon inner width of the enclosure and location of the cover (e.g. mountain area etc).
Enclosure is made of aluminium profiles (Al, Mg, Si alloy) with surface treatment (natural elox colour or white RAL 9010, beige RAL1015, green RAL 6009, anthracite DB703). The aluminium frame is filled with polycarbonate sheets Makrolon. All connection accessories are stainless steel. It is necessary to use the highest quality material as swimming pool thanks to the chemicals in the water forms aggressive environment which attacks all corrosive materials.
Yes, condensation inside the twin-walled polycarbonate is normal and it is impossible to avoid it. This condensed water is disposed by drain channels.
Enclosure does not need any special treatment for winter time. It is enough if you close and secure all segments and doors. It is important to remove any layer of snow. By doing so, you prevent overloading and damaging structure of the enclosure.
Guarantee is 3 years on the whole enclosure, 5 years on surface treatment of profiles, 15 years on polycarbonate.
Duration of the installation depends on size of enclosure and foundation. Smaller enclosures take approximately 3-4 hours.
Delivery time is between 4-8weeks from the order (depends on factory’s workload).
Yes, general rule is that darker colours of polycarbonate slightly decline water temperature (approximately 1 -2 °C) comparison to clear polycarbonate.
The roofing is possible to increase the pool water temperature die local conditions of 6-10 ° C
Enclosure is used to extend swimming season. In wintertime you would have big heat lost.
Yes, for easy glide of segments it is necessary to have concrete basement.
General rule: distance between rail and edge of pool = height of the pool above ground (e.g. lip of the pool is 6cm that means inner end of rail can be 6 cm).
It is very easy to look after your enclosure. Just wash it with jet wash, make sure there are not any foreign object in the rails and on the enclosures
You can order an enclosure via e-mail or telephone. It is also possible arrange a no obligation meeting where we will explain all details, describe many option we offer (colour, size, style etc.) then we ca prepare offer just for you.
When the pool is enclosed it extend swimming season from spring to autumn. It also cut the cost of heating and prevents heat lost. Makes pool maintenance easier, shorters pool maintenance time, keeps the water free from dirt, prevents accidents (e.g. children or animals falling into water) In hot days you can simply shift the enclosure behind pool and enjoy open-air swimming pool.